Technika Professional Series - Oven Settings and Functions

PG 13
This oven’s electrical circuitry features a thermal shuto system. If the oven heats to abnormally
high temperatures, the system will shut o the power supply to the heating elements for a
period of time until the oven cools down to a safe temperature. Attention: The oven comes with
a soft close door feature which will only operate correctly when sucient initial force is applied
when closing. Should insucient force be applied, the door may need to be closed manually.
Switching the Light On/O
The light will switch on when any oven function is running.
Setting the oven function
1. After the clock is set, turn the Function knob (1) clockwise to select a function. Each
function will light up in the display on the control panel as it is selected.
Note: Each function has a preset temperature and cooking time which will be displayed on the
control panel once a function has been selected.(See section on ‘Oven Functions”)
2. If you are happy with the preset temperature and cooking time, just wait approx 5 seconds
and the oven will turn on and begin cooking.
To change the temperature or cooking time, please see the following instructions.
Setting the oven temperature
1. After the function is selected, touch the Temperature button to enter the temperature
settings. The temperature will flash.
2. Touch the ‘+’ or ‘-’ buttons to adjust the temperature up or down in increments of 5 degrees.
Wait approx 5 seconds and the oven will turn on and begin cooking. The temperature can
also be adjusted in the same way during cooking.
Setting the Cook time
You can also set the cook time during cooking.
1. After the function is selected, touch the Time Button several times until the Cook
Time icon I>I on the display begins to flash.
2. Touch the ‘+’ or ‘-’ buttons to set the desired cook time.
3. Touch the Time Button again and the End time icon on the display begins to flash.
Touch the Time Button again to skip the End time or follow steps 2 and 3 below to set the
End time.
Setting the End time
You can also set the end time during cooking.
1. Touch the Time Button several times until the End time icon >I on the display begins to
flash.
2. Touch the ‘+’ or ‘-’ buttons to set the desired end time.
3. Touch the Time Button again or wait for about 5 seconds and the new end time will be set.
When the cooking time has ended “ “ will show in the display and the oven will beep 5 times.
USE AND CARE
Safety shuto