TechnipFMC TRIPLEX M06 - Figure 4: Fluid End Components (Std. Cast Style)

Doc No: OMM50001243
Rev: C Page 23 of 68
This document and all the information contained herei
n are the confidential and exclusive property of TechnipFMC,
and may not be reproduced, disclosed, or made public in
any manner prior to express written authorization by TechnipFMC.
Figure 4: Fluid End Components (Std. Cast Style)
The illustration above depicts a pump with a standard cast iron fluid cylinder, Disc type
valves, and standard braided packing. The standard cast iron fluid cylinder uses
threaded plugs for valve covers.
The service procedures outlined in this manual are intended to describe the more
popular type of pump. Other configurations and minor design differences may exist with
alternate pumps. Some procedures many require slight adaptations as a result.