Doc No: OMM50001243
Rev: C Page 62 of 68
This document and all the information contained herei
n are the confidential and exclusive property of TechnipFMC,
and may not be reproduced, disclosed, or made public in
any manner prior to express written authorization by TechnipFMC.
14.0 Ordering Parts
Service parts are available through FMC's worldwide network of distributors or from the
original supplier for the equipment that includes the FMC pump. If unsure where to
purchase parts, contact FMC customer service for the location of an authorized parts
retailer in your area.
Always insist on genuine FMC replacement parts.
Use the assembly drawing and bill of material included with this manual to determine
the components and corresponding part numbers required to service the pump.
Confirm that the part number on the drawing or bill of material matches the part number
of the pump requiring parts.
When ordering parts, always reference the part number and serial number of the pump
with the order. These numbers can be found stamped on the metal name tag affixed to
the power end of every pump. Referencing these numbers can ensure that the
components you receive work as intended with your pump.
Inquire about any special service tools or complete maintenance kits.
To Next Page
Loading...