TechniSat DIGIPLUS UHD S2 User Manual

153
DE
EN
Power supply
Power adapter External switching power adapter
Input voltage 100-240 V AC, 50/60 Hz
Output voltage 12 V DC, 3 A
Power consumption (with factory seings and without external loads)
Standby:
Standby clock o 0.3W*
Standby clock on 0.4W*
Standby with activated network standby mode and LAN connection:
4.2W*
TV operation (UHD 2160p):
without LNB feed 7.2W
with 1 x 400 mA LNB current at 18 V 17.1W
*) not valid during EPG updating & soware updating
TechniSat always tries to reduce the power consumption with the help of soware
optimisations and the corresponding updates. As a result, the values shown here may
deviate from the actual power consumption of your device. You can find the current
values for power consumption on our website www.technisat.de.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English