TechniSat DIGITRADIO 3 User Manual

62
Important instructions regarding disposal: Baeries may contain toxic
substances that cause harm to the environment. Therefore, it is imperative
that you dispose of the baeries according to the legal provisions in force.
Never dispose of baeries in normal household waste.
Never place the remote control on extremely hot or very wet surfaces.
5.3.2 Connecting the mains adapter
> Connect the mains unit provided to the port marked DC-IN (17) on the back of
the DIGITRADIO 3. Then connect the power supply to the mains.
Ensure that the operating voltage of the power supply unit matches the mains
voltage before you insert it into the wall socket.
Aer establishing the mains connection for the first time, "TechniSat Digital
Radio" appears on the display. You can then select the operating language.
Using the < or > buons on the remote control, select one of the available
languages and confirm the selection by pressing the OK buon.
This will then be followed by an initial station scan via DAB+. Please refer to
the information in Section 5.4.1.
5.3.3 Connecting and aligning the telescopic antenna
The number and quality of the stations to be received depend on the reception
conditions at the installation location. Excellent reception can be achieved using the
telescopic antenna.
> Screw the telescopic antenna to the Antenna connection (14) and tighten so
as hand-tight, using the installation tool.
> Align the telescopic antenna and extend it.
The exact alignment of the telescopic antenna is oen important, especially at
the fringes of the DAB+ reception area. You can quickly find the location of the
nearest transmission tower online, by visiting “www.dabplus.de”.
Start the first scan at a window, pointing in the direction of the transmission
mast.
If the weather conditions are poor, DAB+ reception may be limited.
Do not touch the telescopic antenna during station playback. This could
reduce the reception and result in sound dropouts.
BDA_DIGITRADIO_3_V11.indd 62BDA_DIGITRADIO_3_V11.indd 62 10/11/2020 09:4510/11/2020 09:45

TechniSat DIGITRADIO 3 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
RMS rated power	20 W
Audio formats supported	AAC, MP3, WAV, WMA
Number of built-in speakers	2
Display type	OLED
Bluetooth version	4.1
Bluetooth profiles	A2DP, AVRCP
Docking station included	No
Apple docking compatibility	Not supported
Headphone outputs	1
Headphone connectivity	3.5 mm
Antenna type	External
Product color	Black, Silver, Walnut
Package depth	215 mm
Package width	480 mm
Package height	190 mm
Package weight	4590 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Power source	AC/DC
AC input voltage	230 V
DC input voltage	12 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	168 mm
Width	380 mm
Height	130 mm
Weight	3570 g