TechniSat DIGITRADIO 3 User Manual

73
DE
EN
FR
NL
10 CD player
10.1 General information on CDs/MP3 CDs
The device is designed for music CDs that are played with audio data (CD-DA or MP3
for CD-R and CD-RW). MP3 formats must be created with ISO 9660 Level 1 or Level
2. Multi-session CDs cannot be read.
In MP3 mode, the terms "Folder" = Album and "Track" are critical. "Album"
corresponds to the folder on the PC, "track" to the PC file or a CD-DA track.
The device sorts the albums or the tracks on an album by name, in alphabetical
order. If you prefer a dierent order, change the name of the track or album and
place a number in front of the name.
When burning a CD-R and CD-RW with audio data, various problems can arise, which
could occasionally compromise smooth playback. This is caused by faulty soware
and hardware seings or the blank disc being used. If errors occur, you should
contact your CD burner manufacturer's/
burner soware provider's customer service department or search for relevant
information - e.g. on the Internet.
If you create audio CDs, observe the legal requirements and do not breach
third-party copyrights.
The device can play CDs with MP3 data (.mp3, .wma, AAC with file extension
.m4a) and normal audio CDs (.wav). Do not use any other extensions such as
*.doc, *.txt, *.pdf, etc. if audio files are being converted to MP3.
Given the variety of dierent encoder soware programmes, it cannot be
guaranteed that every MP3 file can be played without a problem.
In the event that tracks/files are faulty, playback will continue with the next
track/file.
When burning the CD, it is worth doing so at low speed and creating the CD
as a single session and finalised.
10.2 Discs you can use
The CD player is compatible with CD, CD-R/RW and MP3 CD media. You can only play
discs with a disc size of 12 cm and a playing time of 74 min. on this device.
If you are transporting the device, remove the disc from the drive. This
prevents damage to the CD player and the disc.
The playback quality with MP3 CDs depends on the bit rate seing and the
burning soware used.
BDA_DIGITRADIO_3_V11.indd 73BDA_DIGITRADIO_3_V11.indd 73 10/11/2020 09:4510/11/2020 09:45

TechniSat DIGITRADIO 3 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
RMS rated power	20 W
Audio formats supported	AAC, MP3, WAV, WMA
Number of built-in speakers	2
Display type	OLED
Bluetooth version	4.1
Bluetooth profiles	A2DP, AVRCP
Docking station included	No
Apple docking compatibility	Not supported
Headphone outputs	1
Headphone connectivity	3.5 mm
Antenna type	External
Product color	Black, Silver, Walnut
Package depth	215 mm
Package width	480 mm
Package height	190 mm
Package weight	4590 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Power source	AC/DC
AC input voltage	230 V
DC input voltage	12 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	168 mm
Width	380 mm
Height	130 mm
Weight	3570 g