4.6.2
Switch off the
device
In battery mode:
>
Pressing the On/Standby button switches the device to power saving mode
and the display goes out. The message [Power off] appears briefly on the
display.
In power supply operation
>
Press the On/Standby button to switch the device to standby mode. The
message [Standby] appears briefly on the display, followed by the time/date
and the battery charge status.
4.6.3
Source selection
>
The Mode/Menu button (3) can be used to switch between the sources
DAB+ (digital radio), FM (FM) and Bluetooth. To do this, briefly press the
ok button until the desired source is shown on the display.
4.6.4
Setting the
volume
>
Adjust the volume using the Volume + and - buttons (8, 9).
The set volume is shown on the display using a bar chart.
To Next Page
Loading...
