7.4
Manual
station search
>
Briefly press the Down◀, Up▶ buttons several times to set the desired
station or frequency.
The display shows the frequency in steps of 0.05 MHz.
7.5
Search
setting
The sensitivity of the search run can be set in this menu item.
>
Open the menu and use the Down◀, Up▶ buttons to select the
[Search setting] entry. Press Select/Info.
>
Select whether the search should only stop for strong channels [Only strong
channels] or for all channels (including weak channels) [All channels].
With the All channels setting, the automatic search stops at every available
channel. This can result in weak stations
being played back
with
noise.
However, more stations are also found in this way than with the "Only
strong stations" setting.
>
Confirm by pressing the Select/Info button.
To Next Page
Loading...
