7.6
Audio
setting
>
Open the menu and use the Down◀, Up▶ buttons to select the
[Audio setting] entry. Press Select/Info.
>
Use Down◀, Up▶ to select the entry [Stereo possible] or [Mono only] to
play back in stereo or only in mono sound when FM reception is weak.
>
Confirm by pressing the Select/Info button.
7.7
Store FM stations in a memory location
The programme memory can store up to 20 stations in the FM range.
>
First set the desired transmitter frequency.
>
To store this station in a memory location, press and hold the Preset button
during playback until [Favourite memory] appears in the display. Then use
the Down◀, Up▶ buttons to select a favourite memory (1...20). Press the
Select/Info button to save.
>
Repeat this procedure to save additional transmitters.
To Next Page
Loading...
