[Operation] controls the brightness in the normal, switched-on state. Here
you can choose between the brightness levels [High], [Medium] and
[Low]. Use Down◀, Up▶ to select a brightness level and press
Select/Info to save.
[Standby] controls the brightness in standby mode (mains operation). Here
you can choose between the brightness levels [High], [Medium] and
[Low]. Use Down◀, Up▶ to select a brightness level and press
Select/Info to save.
10.3
Language
>
Open the menu and use the Down◀, Up▶ buttons to select the
[Language] entry and press Select/Info.
>
Use Down◀, Up▶ to select one of the available languages and confirm
your selection by pressing the Select/Info button.
10.4
Factory setting
If you change the location of the device, e.g. if you move house, you may no longer be
able to receive the saved channels. In this case, resetting to the factory settings will
allow you to restore all saved channels.
To Next Page
Loading...
