TechniSat Switch Series User Manual

10
1.3.2 Service instructions
This product is quality-tested and comes with the statutory warranty
period of 24 months from the date of purchase. Please keep your
receipt as proof of purchase. In the event of warranty claims, please
contact the product dealer.
For questions and information, or if there is a problem with this
device, please contact our technical hotline:
Mon. - Fri. 8:00 am - 6:00 pm at tel.:
+49 (0) 3925 9220 1800.
Repair orders can also be placed directly online at www.technisat.de/
reparatur.
If the device needs to be sent to us for any reason, please only use the
following address:
TechniSat Digital GmbH
Service Center
Nordstr. 4a
39418 Stassfurt, Germany

TechniSat Switch Series Specifications

General

Brand	TechniSat
Model	Switch Series
Category	Switch
Language	English

Summary

1 Safety instructions

1.1 Signs and symbols used

Explains warning symbols (DANGER, WARNING, CAUTION) and informational symbols.

1.2 Intended use

1.3 Using Smart Home products safely

1.3.2 Service instructions

2 Special features

3 Illustrations

4 Connection diagram

4.1 Installation

4.2 Terminal connection

5 Integration into the Z-Wave network (Adding / Inclusion)

5.1 SmartStart setup

Describes adding a Z-Wave product to the network by scanning a QR code.

WARNING

Emphasizes that only trained personnel may connect devices without plugs due to electric shock risk.

5.2 Manual set-up

WARNING

Warns that only trained personnel should connect devices due to electric shock risk.

WARNING

States the device must be disconnected from mains during installation, with risk of electric shock.

5.3 Removing the device from the network

5.4 Resetting the device

6 Configuration

7 Supported association groups

8 Basic command class

9 Notification command class

10 Supported Z-Wave command classes

11 Central scene command class

12 Firmware update

13 Technical data