TechniSat Switch Series

1
Series switch
Instruction manual
Keep the operating instructions in a safe
place for later use and teaching-in of the
product.

TechniSat Switch Series Specifications

General

Brand	TechniSat
Model	Switch Series
Category	Switch
Language	English

Summary

1 Safety instructions

1.1 Signs and symbols used

Explains warning symbols (DANGER, WARNING, CAUTION) and informational symbols.

1.2 Intended use

1.3 Using Smart Home products safely

1.3.2 Service instructions

2 Special features

3 Illustrations

4 Connection diagram

4.1 Installation

4.2 Terminal connection

5 Integration into the Z-Wave network (Adding Inclusion)

5.1 SmartStart setup

Describes adding a Z-Wave product to the network by scanning a QR code.

WARNING

Emphasizes that only trained personnel may connect devices without plugs due to electric shock risk.

5.2 Manual set-up

WARNING

Warns that only trained personnel should connect devices due to electric shock risk.

WARNING

States the device must be disconnected from mains during installation, with risk of electric shock.

5.3 Removing the device from the network

5.4 Resetting the device

6 Configuration

7 Supported association groups

8 Basic command class

9 Notification command class

10 Supported Z-Wave command classes

11 Central scene command class

12 Firmware update

13 Technical data