TechniSat TECHNISTAR S6

28
EN
> To accept the selected regional channels, use the arrow buons to highlight
the Accept field.
> Press the OK buon to move on to the next step of the installation.
Loading SFI data
Your digital receiver features an electronic programme information service (Electronic
Programme Guide). You must first get the receiver to download the SFI data from
the satellite to enable electronic programme guide data to be displayed.
For this reason, the receiver will automatically start downloading the SFI data aer
the channel list update or aer the channel scan is completed. This process can take
up to 30 minutes.
> If you do not want to wait for the SFI data to be downloaded, you can
skip this process by pressing the Info buon. The SFI data will then be
automatically updated the following night, or you can update it manually at
any time.
If the SFI update has been skipped, your device automatically loads the SFI
data, provided that the automatic SFI update is enabled and, moreover, that
the device is on standby at this precise moment. You can also start the
update manually at any time. For more detailed information please consult the
instruction manual.