296
Troubleshooting
- Incorrect values from the transmitter or no signal.
- Batteries of the transmitter are empty.
Please replace them.
- There are sources of interference or obstacles
nearby or the distance to the base station is too
great.
Change the position of the transmitter and/or the
base station. "Visual contact" between transmit-
ter and receiver often improves transmission.
- Internal connection problem.
Restart the base station and transmitter by re-
moving and reinserting the batteries.
- No reception of the time signal and weather fore-
cast.
- Data reception may be affected by nearby moun-
tains and valleys, by nearby motorways, rail-
ways, airports, power lines, etc., by nearby con-
struction sites, by nearby electrical equipment
(computers, televisions, etc.) and metallic ob-
jects, by location in the middle of tall buildings or
in moving vehicles, by concrete buildings.
To Next Page
Loading...
