17
Spazio Forma
Contents
05092017_2
05092017
h
c
f
g
d
g
ee
Loosen the locknut (h).
Turn the foot (c) to adjust it.
Tighten the locknut (h).
After adjusting the foot, replace the lower guard (d)
and the cover (f), then tighten up the eight screws (g)
and the two screws (e).
1 Technical information
1.1 Equipment identification
1.2 Description of the equipment
1.3 Installation and assembly
1.3.1 Place of installation
1.3.2 Unpacking
1.3.3 Assembly
1.3.4 Levelling
1.3.5 Moving the equipment
1.3.6 Electrical connection
1.3.7 Grounding instructions
1.4 Maintenance
1.5 Easily solved problems
1.6 Technical assistance
1.7 Storage
1.8 Scrapping
2 Using the Spazio Forma
3 Spazio Forma software
To Next Page
Loading...
