Page 12 sur 26
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
4.15. Output state change - P
The output state change can be done by sending the command P :
[STX]POOE[CR][ETX]
OO : number of the concerned output
E : state : 0 for inactive, 1 for active
Example : activation of the output 10
[STX]P101[CR][ETX]
4.16. Variable value recovery - U
The recovery of a variable value can be done by sending the command U :
[STX]UNN..NN[CR][ETX]
NN.NN : variable name
In this case, the machine sends a return frame with the variable value :
[STX]UVV..VVETX]
Where VV..VV is the value.
Example : to get back the variable VAR value
[STX]UVAR[CR][ETX]
4.17. Serial number value recovery - W
The recovery of the serial number value can be done by sending the command W :
[STX]WNN..NN[CR][ETX]
NN..NN :serial number name
In this case, the machine sends a return frame with the serial number value:
[STX]WVV..VVETX]
Where VV..VV is the value.
Example : to get back the serial number SER value
[STX]WSER[CR][ETX]
To Next Page
Loading...
