Technomark M4 inline - Error Code and Trouble Shooting

Page 20 sur 26
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Modèle du 06/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
7. Error code and trouble shooting.
The TECHNOMARK machine will help you to detect any malfunction that could happen. If a problem is detected,
error codes can appear on the screen.
The window will be closed with key
Please refer to the following table to identify error code:
 Error code
 1st level
troubleshooting
 Remedial action
Error code 1: Memory error.
Restart the controller.
If the problem persists, contact
the After-Sales Customer
Service Team.
Error code 2: File error.
The current file is corrupted.
No more space available to
save the file.
Restart the controller.
Recreate an identical file and
delete the defective file.
Delete certain files from the
controller.
Contact the After-Sales
Customer Service Team.
Error code 3: Font error.
The file font does not exist in
the machine.
Change the font of the file you
wish to open.
Error code 4: Matrix error.
The matrix of the text in the file
does not exist in the machine.
Change the matrix of the text.