TSR2900-10 Hardware Installation Manual
- 9
3.3 Connecting the Port
3.3.1 Connecting the Console Port
The TSR2900-10 router has a console port and a remote aux console port.
Console port
The rate of the console port is a value of 9600bps. It has a standard RJ45 plug
with odd-even check. After you connect the console port to the serial port of PC
through a console cable, you can configure and monitor the router of TSR2900-
10 by running the terminal emulation software, such as super Windows terminal.
The cable is provided according to the host. The communication parameters of
the terminal serial port can be set to a rate of 9600bps, eight data bits, one stop
bit, no sum check bit and traffic control.
The RJ-45 connector of the console port is shown in Figure 3-3. The RJ45 plug
corresponds to the RJ45 socket, whose pins can be aligned from left to right with the
value from 1 to 8.
Connecting the console port of TSR2900-10 with the computer:
To Next Page
Loading...
Need help?
General