Tecnam P2012 - Page 43

P2012
AIRCRAFT MAINTENANCE MANUAL
32-20 procedure included in ATA 32-10-00 and )
32-10
32-20
Landing gear Check MLG and NLG for excessive plays
X
32-10
32-20
Landing gear Visually inspection and cleaning MLG Assy
X
32-10
32-20
Landing gear Visually inspection and cleaning NLG Assy
X
32-10
32-20
Landing gear MLG removal, check the MLG and MLG fitting contact
surfaces for corrosion, cleaning, MLG installation, sealing the
joint.
X
32-10
32-20
Landing gear NLG removal, check the NLG and NLG fitting contact
surfaces for corrosion, cleaning, NLG installation.
X
32-10
32-20
Landing gear NLG and MLG greasing according lubrication charts (Refer to
05-30-00).
X
32-10
32-20
Landing gear Visually check NLG shimmy damper hydraulic fluid leakage.
X
32-00 Landing gear Visually inspect nose gear steering control and travels.
X
32-00 Landing gear Visually inspect rudder pedals and steering linkages for
operation, condition and cracks (Refer to ATA )
X
(*)
32-00 Landing gear Visually inspect tires for cuts, worn spots, bulges, on the side
walls, foreign objects in the threads and threads condition
(Refer to ).
X
32-00 Landing gear Visually check the MLG and NLG wheels for
damage/deformation, (Refer to 05-30-00).
X
32-00 Landing gear Check for free play in wheel bearings. Examine wheels:
check for eventual cracks.
X
(*)
32-00 Landing gear Inspect the brakes line for damage and hydraulic fluid
leakage. Check line retaining clamps.
X
32-00 Landing gear Check parking valve for damage, leakage and proper
installation. Inspect parking brake handle, check for restricted
movement, interference or unusual loosening.
X
(*)
32-00 Landing gear Check oil levels in master cylinders. Check toe brakes for
operation and master cylinder and hoses for damage and
leakage in case of excessive brake oil consumption.
X
32-00 Landing gear MLG and NLG cleaning (external parts).
X
ATA Aircraft Zone Maintenance Task Frequency
A B C D E
LANDING GEAR
32-00 Landing gear Disassemble the wheels and check for cracks, corrosion, dents,
800 FH or
05-20-00
Page 5
5
th
Edition - Rev. 0
2022, Jan 14