Tecnam P2012 - Page 9

P2012
AIRCRAFT MAINTENANCE MANUAL
Revision Revised chapter /
page
Description of Revision Reference
0
31-10/2, 4 Updated point 2 (B) in ‘’Component
Description’’ chapter and added
figure (Mod 2012/150)
Under DOA
privileges
(DOA ref.
EASA21J.335)
31-10/204, 205 Added procedure ‘’Aileron Trim
Switch protection Removal’’ and
related figure (Mod 2012/150)
31-10/206, 207 Added procedure ‘’Flight Hour Meter
Removal’’ and related figure (Mod
2012/163 or TR-AMM-212-005)
32-10/205, 206 Added procedure ‘’MLG Torque
arms and rod attachment points-
inspection’’ and related figure
32-10/210 to 216 Updated procedure ‘’MLG
Overhaul’’
32-20/206, 207 Added procedure ‘’NLG Torque arms
attachment points-inspection’’ and
related figure
32-40/219 Added procedure ‘’Brake System
operational check’’
32-40/220 Added procedure ‘’Brake System
Function Operational Test’’
32-40/221 Added procedure ‘’Master Cylinders
Inspection’’
34-00/208 Added procedure ‘’Avionic
Equipments Visual Inspection’’
34-10/201 to 214 Added procedure ‘’Pitot/Static
System Functional Test’’
34-10/229 to 231 Added procedure ‘’Static Port Joint
and Tubes Inspection’’ and related
figure
34-20/1, 2, 4, 5, 6 Updated point 5 in ‘’Component
Description and Operation’’ chapter
and added figures (Mod 2012/184 or
TR-AMM-212-010)
34-20/209, 210 Updated procedure ‘’Compass
Compensation procedure’’
34-40 Added section (Mod 2012/187 or TR-
AMM-212-011)
35-50/211 to 214 Added procedure ‘’GTX345R
Functional Check’’
34-60/2 Added point D in ‘’Component
description and Operation’’ chapter
(Mod 2012/191 or TR-AMM-212-015)
34-60/101 Added section (Mod 2012/191 or TR-
AMM-212-015)
34-60/208 to 212 Added procedures ‘’Synthetic Vision
System’’
51-80/204, 205 Updated Table 1 ‘’Measurement
point and maximum allowed
RECORD OF REVISIONS
Page 7
5
th
Edition - Rev. 0