INSTRUCTION MANUAL FOR INSTALLATION, MAINTENANCE AND USE Rev-01
RECTANGULAR BRATT PANS GAS TYPE “BR8G080I - BR8G080I.M” “BR9G090I –
BR9G090I.M” “BR1G120I – BR1G120I.M” “BR1G150I – BR1G150I.M” “BR1G160I –
BR1G160I.M” “BR1G200I – BR1G200I.M”
1 GENERAL REMINDERS AND NOTES
1.1 INTRODUCTION
The heads of business units, where the unit will be installed, have an obligation, in
accordance with the regulations, read carefully the contents of this manual and read
the operators and maintainers involved for parts that they compete.
This manual includes all the information necessary to ensure that our equipment can be
used properly and safely.
Keep this manual with care, so that it is always available to all users of the machine!
The manufacturer does not assume any responsibility or warranty commitment for
accidents and damage due to non-compliance with the requirements or installation or
maintenance not in accordance with safety standards.
Also applies in case of improper use of the appliance by the operator.
1.2 SIMBOLS AND PICTOGRAMS
NOTES!
Report a recommendation or information deemed of particular importance.
ATTENTION!
Report an operation or a dangerous situation.
ATTENTION!
Report a requirement or an obligation.
ATTENTION!
Report the prohibition of operation.
− Read the warnings contained in this manual carefully as they provide important information concerning
safety during the installation, use and maintenance of the appliance.
− Keep these instructions carefully!
− Only personnel trained for its specific use should use the equipment.
− Keep the appliance under control during use.
− The appliance should be used only for the purpose for which it has been specifically designed; other uses
are improper and hence dangerous.
− During operation surfaces can become hot and require special operation.