Chapter 3 Program Tools 18
Chapter
3:
Program
T
ools
PC Programming Software “SG2 Client”
The SG2 Client programming software provides two edit modes, Ladder Logic and Function Block
Diagram (FBD).
The SG2 Client software includes the following features:
1.
Easy
and
convenient
program
creation
and
editing.
2.
Programs
can
be
saved
on
a
computer
for
ar
chiving
and
reuse.
Programs
can
also
be
uploaded
directly
from
an
SG2
and
saved
or
edited.
3.
Enables
users
to
print
programs
for
reference
and
review
.
4.
The
Simulation
Mode
allows
users
to
run
and
test
their
program
before it
is
loaded
to
the
controller
.
5.
Real-time
communication
allows
the
user
to
monitor
and
for
ce
I/O
on
the
SG2 smart relay
operation
during
RUN
mode.
Installing the Software
Install the SG2 Client Software from CD or from the free internet download at
www.taian-technology.com
Connecting the Software
connector cover from SG2 using a flathead screwdriver as shown in the
ert the plastic connector end of the programming cable into the SG2 smart
Remove the plastic
figure below. Ins
relay as shown in the figure below. Connect the opposite end of the cable to an RS232C
serial port on the computer.
To Next Page
Loading...
