TECO SG2 Series - Function Blocks: Counters, Timers, RTC, Analog

Chapter 5 FBD Programming 81
NAND Logic Diagram
FBD:
→
LADDER:
=
Not(I01 And I02 And I03)
Note：The input terminal is NOP which is equivalent to ‘Hi’
NAND (EDGE) Logic Diagram
FBD:
→
LADDER:
=
Not(I01 And I02 And I03) And d
Note：The input terminal is NOP which is equivalent to ‘Lo’
OR Logic Diagram
FBD:
→
LADDER:
=
I01 or I02 or I03
Note：The input terminal is NOP which is equivalent to ‘Lo’
NOR Logic Diagram
FBD:
→
LADDER:
=
Not ( I01 or I02 or I03 )
Note：The input terminal is NOP which is equivalent to ‘Lo’