Chapter 4 Relay Ladder Logic Programming 69
RTC Mode 4 ( 30-second adjustment)
The 30-second adjustment Mode 4 allows the Rx coil to activate based on week, hour, minute and second.
The configuration dialog below allows for selection of week, hour, minute and second for the Rx coil to activate
ON, and 30-second adjustment then Rx OFF.
Example1: preset minute < 30s
Symbol Description
c
Setting RTC adjustment week
d
RTC mode 4
e
RTC present hour
f
RTC present minute
g
Setting RTC adjustment hour
h
Setting RTC adjustment minute
i
Setting RTC adjustment second
j
RTC Code (R1~RF, total 15 group)
Example2: preset minute >= 30s
To Next Page
Loading...
