TECOM TS1061 - Product Overview; Mechanical and Environmental Specifications

TS1061 Dual Wiegand Interface Installation Manual 1
Product overview
This manual applies to the TS1061 Dual Wiegand Interface. The Dual Wiegand
Interface can be attached to a ChallengerPlus panel or a TS1066 Network
Access Controller to provide two Wiegand interfaces, as well as additional inputs
and relays.
Note: The Dual Wiegand Interface is only compatible with ChallengerPlus and
not supported by Challenger10 or Challenger V8.
This manual describes:
• How to install the Dual Wiegand Interface
• How to connect the Dual Wiegand Interface to a ChallengerPlus panel or
a Network Access Controller
• How to connect other equipment to the Dual Wiegand Interface
This manual is intended for use only by trained Challenger installation and
configuration technicians.
Mechanical and environmental specifications
Storage
Temperature
-20 to +80°C
Location
Indoor. Dry area.
Physical dimensions
(W x D x H)
128 x 78 x 21 mm
Weight
255g
Operating environment
Temperature
0 to 50°C (Refer to Appendix C:
Operating temperature
Relative humidity
0 to 93% non-condensing
Pollution Class
2 or lower
Altitude
≤ 2000m