TECOM TS1061 - Product Contents; Related Documentation

2 TS1061 Dual Wiegand Interface Installation Manual
Product contents
Inspect the package and contents for visible damage. If any components are
damaged or missing, do not use the unit; contact the supplier immediately. If you
need to return the unit, you must ship it in the original box.
Table 1 below lists the items that are shipped with a TS1061 Dual Wiegand
Interface.
Table 1: TS1061 shipping list
Quantity
Item
Quantity
Item
1
TS1061 board
7
2-way plug-on screw terminal
connectors
1
TS1061 Dual Wiegand Interface
Installation Manual
1
4-way RS-485 cable
5
M3 x 10 pan head screws
1
2-way lock power cable
4
Standoff board mounts
8
10K 1/4 watt resistors
8
3-way plug-on screw terminal
connectors
1
Earth lead
Related documentation
The ChallengerPlus Installation and Quick Programming Manual and
ChallengerPlus Programming Manual provide detailed information about
configuring and programming a ChallengerPlus system.
The ENC-LGE Large Enclosure Installation Manual provides instructions for
installing the ENC-LGE Large Enclosure.
The TS1066 Network Access Controller Installation Manual describes how to
install the TS1066 Network Access Controller. The TS1066 Network Access
Controller Programming Manual provides detailed information about configuring
and programming the Network Access Controller, including devices attached to
its buses, such as the TS1061 Dual Wiegand Interface.
The ChallengerPlus system is modular. Refer also to the documentation that is
shipped with each module that you intend to use.