EasyManua.ls Logo

Tecsun PL-606 - Troubleshooting Common Issues

Tecsun PL-606
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
capacity of power incorrectly.
4. In case of radio not to be used for a long period, draw out the batteries for preventing
liquid leakage and damaging the parts of radio.
TROUBLE SHOOTING
QUESTIONS ANSWERS SOLUTIONS
Can not turn on the radio. -No power with the
batteries.
-Didn't install the
batteries properly.
-Power button is locked.
-Replace the new
batteries.
-According to "+" or
"-" sign to install
the batteries again.
-Press the [
]
button to unlocked.
Radio goes off when you
are listening.
-No power with the
batteries.
-Sleep timer is activated.
-Replace the batteries.
-Turn on the radio again.
Can not store some
stations using ATS Some
station store with noise
using ATS.
-Frequency of stations are
too weak.
-There are interference
near by your area.
-Search the station
manually.
- Low down the
antenna or move
to other location
and try again.
Only limited FM stations
can be received in Japan.
-FM frequency is
76~90MHz for
Japan.
-Turn the radio off
and press & hold
the [FM] button
press [FM]
button again to
select 76~108MHz.
Received very poor AM in
USA.
-USA is using 10kHz
step for AM.
-Turn off the radio
press the [9/10kHz]
button to select
10kHz.
When the alarm activated
(alarm by radio), there is
only noise with the
broadcast.
-Did not set the proper
radio station for the alarm.
-Or there are no
broadcasting at that radio
station.
-Or you are in another city
where does not have a
radio station for your
-Preset your alarm
station properly
(see the above
setting).
-Make sure it has
radio broadcast in
your location.

Related product manuals