Tecsun R-108 - Listening to Stored Stations; Delete Memory

www.tecsunradios.com.au
11
►LISTENING TO STORED STATIONS
METHOD 1: MANUAL MEMORY TUNING
1. Press the [VM/VF] button to enter memory mode. “PRESET ” will
appear on screen；
2. Rotate the [TUNING] knob to tune into the stored station one
by one.
METHOD 2: AUTO BROWSE MEMORY
1. Press the [VM/VF] button to enter memory mode; “PRESET ” will
appear on screen;
2. Press & hold the / button until the “PRESET” flashing to
auto scan from one memory to another, staying on each station
for about 5 seconds;
3. To stop auto browse memory, simply press the / button.
Note: After the station has been found, you can press the [DELETE]
button to delete the station.
►DELETE MEMORY
METHOD 1. DELETING A SINGLE MEMORY MANUALLY
1. Press the [VM/VF] button, then you enter the address mode;
2. Press & hold the [DELETE] button until “DEL” and
“memory address” flashing;
3. Rotate the [TUNING] knob to select the memory that you want
to delete;
4. Press the [DELETE] button and you will completely delete
the frequency in this address until you hear a sound of “Be--”.
Note：
：
If you do not press the [DELETE] button for 3 seconds
to confirm, the radio will automatically exit the delete operation.
METHOD 2: SEMI-AUTO DELETE MEMORY
1. Press the [VM/VF] button turn into memory address mode until
you hear a sound of “Be--”;