To Next Page

To Previous Page

NT935-4

SERIES

Tthe following object are present inside the box :

Control unit

Start guide and QR code

2 blocks for panel mounting

1 supply terminal 3 poles pitch 5

Code: 2PL0367 - Screws tightening torque 0.5Nm

1 relay terminal 12 poles pitch 5

Code: 2PL0361- Screws tightening torque 0.5Nm

1 Pt100 sensor terminal 12 poles pitch 3.81

Code: 2PL0420 - Screws tightening torque 0.25Nm

1 terminal 2 poles pitch 5 for 4.20mA output (*)

Code: 2PL0364 or 2PL0363

Screws tightening torque 0.5Nm

1 RS485 terminal 3 poles pitch 3.81 (*)

Code: 2PL0366 - Screws tightening torque 0.25Nm

(*) only for NT935 AD version

ACCESSORIES

ATTENTION: always install the device using the terminals included in the pack.

The use of terminals other than those included with the control unit might cause malfunctions.

TECSYSTEM NT935-4 User Manual

Questions and Answers: