Tecway Rainbow - Page 5

《
RAINBOW
》
Product Manual
V1.0
4
1.3.3. Move the host to a suitable position, then unscrew the 6 feet of the machine, adjust the
height of the foot, ensure that all casters are off the ground and the force of each foot is close.
1.3.4. Install the wind turbine components to the host as shown in the following figure
Both sides need
locking screws
m4x8; 6pcs
Adjust the coin box
and the seat of the
lottery box, so that
the box is highly
suitable and stable.
The Coin box, lottery
box, LED, ground air
connectors are
connected, received
in the slot
Lock screws
m4x8;5pcs
Load the plastic
parts of the step
assembly onto the
step machine. Be
careful not to press
the wire.
Lock screws
m4x8;4pcs