Tecway Rainbow - Install the Wind Turbine Component to the Host as Shown below

《
RAINBOW
》
Product Manual
V1.0
3
1.3.2. Install the wind turbine component to the host as shown below
Wind turbine components
need to be plugged into the
slots on both sides of the
bottom of the host.
1
、
The wind turbine assembly is
mounted at the bottom of the host
2
、
The connection between the
Lookout unit and the host is connected.
After the need to put the
wire on the host, to
prevent falling.
3, with two m4x8 screws to lock the
flap to the mainframe, fixed wind units.
M4x8; 2pcs