Need help?Do you have a question about the TeeJet Technologies RADION 8140 and is the answer not in the manual?
General| GPS | Integrated GPS receiver |
|---|---|
| Operating System | Proprietary |
| Power Supply | 12V DC |
| Protection Rating | IP67 |
| Weight | 1.5 kg |
| Processor | ARM Cortex |
| Connectivity | USB, Bluetooth, Wi-Fi |
| Operating Temperature | -20°C to 55°C |
| Display | 8.4 in (21.3 cm) color touchscreen |
Console controls boom sections and includes a master switch for overall operation.
Displays application rates, selectable information, and system status like alarms and pressure.
Accesses settings for home, regulation modes, and target rate options.
Automatic mode adjusts rate by speed; manual mode maintains valve setting.
Allows manual opening and closing of the regulation valve.
Configures language, units, date, and time settings for the console.
Configures target application rates and current nozzle settings for job-specific operations.
Sets application rate step, speed source, simulated speed, and minimum speed.
Configures section, nozzle presets, and regulation parameters.
Sets up manual/automatic calibrations for speed, flow, pressure, and tank sensors.
Establishes alarms on/off and sets trigger levels for various system conditions.
Sets the number of nozzles on the boom to determine spraying width.
Establishes up to five nozzle option sets for quick recall.
Details sensor calibration procedures for speed, flow, liquid pressure, fill flow, and tank level.
Provides overview of system counters, job, campaign, and total counters, with export options.
Compiles active job information into a PDF report.
Allows viewing, deleting, and reporting on job information.
Establishes wheel impulses over a specified distance for speed measurement.
Establishes impulses per litre for accurate flow rate measurement.
Establishes maximum pressure limit and no pressure calibration.
Automatically calibrates the maximum allowed pressure limit for the liquid pressure sensor.
Establishes impulses per litre for the fill flow sensor.
Automatically calibrates the fill flow sensor based on collected volume.
Establishes empty, min, max levels and calibrates tank shape.
Establishes the empty tank value, ensuring the tank is completely empty.
Establishes the minimum level of water on the tank sensor.
Establishes the maximum level of water on the tank sensor.
Allows exporting and importing tank level sensor calibration settings via USB.
Displays user-selected information and application rate.
Displays user-selected data like volume, flow rate, pressure, speed, area, and job number.
Guides on how to select a job number for viewing or exporting job information.
Allows selection of one of up to three preset application rates.
Enables changing the selected target application rate on the Operation screen or in settings.
Modifies the percentage of boost/decrease for the active application rate.
Allows selection of the current nozzle from available preset nozzle types.
Sets up nozzle options like type, capacity, pressure limits, and reference flow.
Displays current volume in the tank; manual adjustment depends on OEM equipment.
Establishes actual/desired material and density in the tank.
Alerts users to active alarms and provides access to alarm message codes.
Configures alarm settings like minimum tank content, flow/pressure cross checks, and section output.
Displays the recommended pressure range for selected nozzles and application parameters.
Shows the current pressure reading, which should not exceed the recommended range.
Displays droplet size classification based on pressure and nozzle type.
Explains the function of section and master switches for boom control.
Indicates no impulses detected from the flow sensor.
Indicates the liquid pressure is below the minimum acceptable level.
Alerts when the tank content is critically low.
Indicates the system cannot achieve the set target application rate.
To Next Page