Teknetics Tek-Point - Re-Tune; Ground-Mineral Calibration

햾
____________________________________
Re-Tune
If at any time during operation
the Tek-Point alarms
irregularly or loses sensitivity,
quickly press-and-release the
button. This Rapid Re-Tune
will return your pinpointer to
stable operation.
Ground-Mineral Calibration
Calibrate the Tek-Point to
operate in mineralized ground
or saltwater.
Calibration Procedure:
1. Start with power on.
2. Touch the tip of the probe to
the soil, or submerge into the
water.
3. Quickly press-and-release
the button.
4. Tek-Point is silent and
ready to detect.
Power
OPERATION