Teknetics Tek-Point - TROUBLE SHOOTING; Short battery life; Pinpointer does not power-up; LED light is flashing

헄
____________________________________
TROUBLE SHOOTING
Problem Solution
1. Short battery life. • Use high-quality batteries.
• Do not use zinc-carbon or
“heavy-duty” batteries.
2. Pinpointer does not • Check battery polarity
power-up. (+ terminal down)
• Check batteries.
3. LED light is flashing. • Move away from metal.
- Pinpointer is in • Then quick-press button.
overload mode.
4. Pinpointer does not • Remove battery cap and
respond to button presses reinstall.
and/or does not detect.
5. Pinpointer beeps • Hold away from metal.
erratically/falses in the air. • Then quick-press button.
6. Pinpointer beeps erratically • Quick-press button to
when in contact with calibrate pinpointer to soil.
the ground. • See pp. 12 & 13 for ground
calibration procedures
7. Pinpointer or metal detector • Shift pinpointer frequency.
interfere with one another. • See p.14 of manual.