Teknic POWER4-HUB

C LEAR P ATH -SC U SER M ANUAL R EV . 1.36 91
T
EKNIC , I NC . T EL . (585) 784-7454
M OTOR M OUNTING , T HERMAL C ONSIDERATIONS
• Do not mount ClearPath-SC over a heat source such as a power
supply, spindle drive, etc.
• Do not mount ClearPath-SC in an unventilated enclosure.
• Do allow for at least 1” of space around each ClearPath-SC.
• ClearPath-SC can be fitted with an external accessory fan if
desired.
• ClearPath-SC will perform a protective shutdown when its
internal temperature sensor threshold is exceeded.
Tip: Teknic recommends mounting the motor such that the USB port and
status LED are visible and accessible when the motor is mounted to the
machine.