TABLE 2 (contl
Characteristic Performance Requirement Supplemental Information
VERTICAL
Input R and C
Input Resistance
1 M fi within 2%.
Input Capacitance
Approximately 47 pF.
Maximum Input Voltage
Dc Coupled
250 V (dc + peak ac).
Ac Coupled
250 V (dc + peak ac) or 250 V
p-p ac at 1 kHz or less.
Chopped Mode Repetition Rate
Approximately 50 kHz.
TRIGGERING
Trigger Sensitivity
Dc Coupled
0.3 division internal or 15 mV
external from dc to 0.5 MHz,
increasing to 0.75 divisions
internal or 50 mV external from
0.5 MHz to 5 MHz.
@
305 Operators
35
To Next Page
Loading...
