Tektronix 475A - Z Axis Input; Outputs; Ag Power Source; Environmental

2 AXIS INPUT
Sensitivity: Noticeable intensity modulation, at normal
intensity settings, by a 5 V p-p signal. A positive-going
signal decreases intensity.
Frequency Range (Usable): Dc to 50 MHz.
Maximum Input Voltage: 100 V (dc plus peak ac) or
100 V p-p ac at 1 KHz or less.
OUTPUTS
CH 2 Out
Output Voltage: At least 50 mV/div into 1 MQ; to at least
25 mV/div into 50 ohms.
Bandwidth: Dc to at least 50 MHz into 50 ohms.
DC Level: About 0 volts.
A+ and B+ Gates
Output Voltage: About 5.5 V of positive-going pulse.
tput Resistance: About 500 ohms.
= — RYS V to 1 >
AC POWER SOURCE
Regulating Ranges:
| 230 V
09 V to 121 va | > _198 V to 242 242 V
Line Frequency: From 48 Hz to 440 Hz.
Maximum Power Consumption: 100 watts at 115V,
60 Hz, medium range.
ENVIRONMENTAL
Operating Temperature: -1590 to +55°C.
Operating Altitude: To 15,000 feet. Maximum operating
temperature decreases 1" C/1,000 feet, above 5,000 feet.
Humidity (Operating and Storage): 5 cycies (120 hours)
referenced to MIL-E-16400F.
475A/DM44 Operators 65