Connecting a probe does not automatically display or enable that channel. Tap an Inactive Channel button to turn on that
channel. Double-tap the Channel badge to open its configuration menu to verify or change probe or cable settings (bandwidth,
attenuation, termination and so on).
Rackmount information
The optional RM5 Rackmount Kit lets you install the oscilloscope in standard equipment racks. The rackmount requires seven
rack units (7U) of space to install.
RM5 Rackmount Kit (Option RM5).
1. Purchase or obtain the rackmount kit.
2. Follow the instructions that came with the rackmount kit (RM5 Rackmount Kit Instructions, Tektronix part number 071-3523-
xx).
3. Make sure to allow adequate clearance on the sides and rear for air ventilation, and on the back for any cables you attach to
the rear panel.
Installing your instrument
6 MSO54, MSO56, MSO58 Installation and Safety Manual
To Next Page
Loading...
Need help?
General
