Analyze Wavefor
mData
3. Use the side-b
ezel menu and the
multipurpose knobs to adjust the vertical
and horizontal settings of the reference
waveform.
R1
Vertical
0.00 div
100 mV/div
Horizontal
0.00 s
4.00 s/div
Quick Tips
Selecting and Displaying Reference Waveforms. You can display all the reference waveforms at the same time. Push
the appropriate screen button to select a particular reference waveform.
Removing Reference Waveforms from the D isplay. To remove a reference waveform from the display, push the
front-panel R button to access the lower-bezel menu. Then push the associated button from the lower-bezel menu
to turn it off.
Scaling and Positioning a Reference Waveform. You can position and scale a reference waveform independently from all
other displayed w aveforms. Select the reference waveform and then adjust it with a m ultipurpose knob. You can do
this whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference waveform operates the same way
whether zoom is turned on or off.
104 MSO2000B and DPO2000B Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
