Tektronix DPO2024B User Manual

Installation
Powering Off the Oscilloscope
To power off the oscilloscope and remove the power cord:
Functional Check
Perform this quick functional check to verify that your oscilloscope is operating correctly.
1. Connect the oscilloscope power cable
as described in Powering On the
Oscilloscope. (See page 10.)
2. Power on the oscilloscope.
MSO2000B and DPO2000B Series Oscilloscopes User Manual 11

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English