Tektronix Keithley SourceMeter 2450 - Page 38

Section
3: Using a remote interface Model 2450 SourceMeter® Instrument
User's Manual
3-16 2450-900-01 Rev. E / August 2019
To verify which command set is selected from a remote interface:
Send the command:
*LANG?
To change to the SCPI command set from a remote interface:
Send the command:
*LANG SCPI
Reboot the instrument.
To change to the TSP command set from a remote interface:
Send the command:
*LANG TSP
Reboot the instrument.
To change to the SCPI 2400 command set from a remote interface:
Send the command:
*LANG SCPI2400
Reboot the instrument.