Tektronix MDO3000 Series Service Manual

Adjustments
Please return the instrument to Tektronix if adjustment is required. There are
no adjustment procedures (calibrations) that can be performed by the customer.
Calibrations can only be performed at an authorized Tektronix Service Center
and require the u se of traceable test equi pment (signal sources and measuring
equipment)
to verify the performance of the instrum ent.
To determine if adjustment is required, use the Performance Verification
procedure
in the MDO3000 Series Mixed Domain Oscilloscopes Specifications
and Performance Verification manual, available at ww w.tektronix.com/manuals.
Adjustment is also required afte r instrument repair.
MDO3000 Series Mixed Domain O scilloscopes Service Manual 7

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English