Tektronix MDO3000 Series Service Manual

Replaceable Parts List
This chapter contains a list of the replaceable modules for these oscilloscopes.
Use this list to identify a nd order replacement parts.
Parts Ordering Information
Replacement parts are available through your local Tektronix field office or
representative.
Changes to Tektronix products are sometimes made to accommoda te improved
components as they become available and to give you the benefit of the latest
improvements. Therefore, when o rdering parts, it is important to include the
followin
ginformationinyourorder:
Part number (see Part Number Revision Level below)
Instrument type or model number
Instrument serial number
Instrument modification number, if applicable
If you order a part that has been replaced with a different or improved part, your
local Tektronix field office or representative will contact you concerning any
change in part number.
Change information, if any, is located at the rear of this manual.
Part Number Revision
Level
Tek
tronix part numb ers contain two digits that show the revision level of the
part. For some parts in this manual, you will find the letters XX in place of the
revision level n umber.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modification (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
MDO3000 Series Mixed Domain O sc illoscopes Service Manual 21

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English