Important Safety Information
Important Saf
ety Information
This manual c
ontains information and warnings that must be followed by the user
for safe o peration and to keep the product in a safe condition.
To safely perform service on this product, additional information is provided at
the end of this section. (See page vii, Service Safety Summary.)
General Safety Summary
Use the product only as specified. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the pro
duct, it is essential that you follow
generally accepted safety procedures in addition to the safety precautions specified
in this manual.
The p roduct is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
While using this product, you may need to acc ess other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to o perating the system.
When incorporating this equipment into a system, the s afety of that system is the
responsibility of the assembler of the system.
To avoid fire or personal
injury
Use proper power cord. Use only the power cord s pecifie d for this product and
certified for the country of use. Do not use the provided power cord for other
products.
Ground the product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the g rounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, make sure that the product is prope
rly grounded.
Do not disable the power cord grounding connection.
iv MDO3000 Series Mixed Domain Oscilloscopes Service Manual
To Next Page
Loading...
Need help?
General
