Preface
Preface
This manual describes the installation and operation of the following oscilloscopes:
MDO4104-6 MDO4104-3 MDO4054-6 MDO4054-3
Key Features
MDO4000 Mixed Domain Oscilloscopes provide time-correlated acquisition of analog, digital, and RF signals in a single
instrument
. They can help you verify, debug, and characterize electronic designs by providing views and measurements
in both the time and frequency domains simultaneously. Key features include:
A dedicated RF input channel for frequency domain measurements
16 digital channels and four analog channels for time domain measurements
Time-correlated acquisition of analog, digital, and RF signals i n a single instrument
The ability to independently set acquisition param eters on the time and frequency domain channels
1 GHz and 500 MHz bandwidths
Sample rates up to 2.5 GS/s on all analog channels
20 M points record length on all channels
>50,000 waveforms/second display rate
Advanced triggering and analysis: I
2
C, SPI, USB 2.0, CAN, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I
2
S, Left
Justified (LJ), Right Justified (RJ), TDM, Ethernet, MIL-STD-1553 (with the appropriate application module), and Parallel
Power analysis application module (optional)
Conven
tionsUsedinThisManual
The following icons are used throughout this manual.
Sequence Step
Front panel power
Connect power
Network
USB
MDO4000 Series Oscilloscopes User Manual xi
To Next Page
Loading...
Need help?
General
