Installation
Random Vibration:
Operating: 0.31 G
RMS
, 5 - 500 Hz, 10 minutes per axis, 3 axes (30 minutes total)
Non-operating: 2.46 G
RMS
, 5 - 500 Hz, 10 minutes per axis, 3 axes (30 minutes total)
Pollution Degree: 2, Indoor use only
CAUTION. To ensu re proper cooling, keep the sides and rear of the oscilloscope clear of obstructions.
P2221 Passive Probe
Input Voltage (between the signal and reference):
300 V
RMS
CAT II
Installation Cate gory II - for measurement s performed on circuits directly connected to the low-voltage installation
Temperature:
Operating: 0 °C to +50 °C (+32 °F to +122 °F)
Nonoperating: -55 °C to +75 °C ( -67 °F to +167 °F)
Pollution Degree: 2, Indoor use only
Humidity: 10% to 95% RH
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 9
To Next Page
Loading...
