Tektronix TDS 410A - Related Manuals

TDS Family Oscilloscope Programmer Manual
vii
Preface
This programmer manual covers the TDS 410A, 420A, 460A, 520A, 524A,
540A, 544A, 620A, 640A, 644A, 684A, 744A, & 784A. It also covers Advanced
DSP Math (optional on the TDS420A, 460A, 520A, 540A, 620A, & 640A), the
RS-232/Centronics Interface (optional on the TDS 410A, 420A, 460A, 520A,
540A, 620A, & 640A), and the Option 05 Video Trigger. This manual provides
information on operating your oscilloscope using the General Purpose Interface
Bus (GPIB) interface.
Related Manuals
Table i lists other documentation for the TDS 410A, 420A, 460A, 520A, 524A,
540A, 544A, 620A, 640A, 644A, 684A, 744A, & 784A digitizing oscilloscopes.
Table i: Other Documentation
Manual Tek Part Number
  
TDS 410A, 420A, & 460A 070–8034–XX
TDS 520A, TDS 524A, TDS 540A, & TDS 544A 070–8710–XX
TDS 620A, TDS 640A, & TDS 644A 070–8715–XX
TDS 684A, 744A, & 784A 070–8991–XX
TDS 500A & 600A Option 05 Video Trigger 070–8748–XX
TDS Reference
TDS 410A, 420A, & 460A 070–8035–XX
TDS 500A & TDS 600A 070–8711–XX
TDS 684A, 744A, & 784A 070–8999–XX
TDS Performance Verification
TDS 410A, 420A, & 460A 070–8721–XX
TDS 520A, 524A, 540A, & 544A 070–8712–XX
TDS 620A, 640A, & 644A 070–8717–XX
TDS 684A, 744A, & 784A 070–8990–XX