Tektronix TDS 410A - Page 245

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–227
 
sets the delay time to 4 ms.
TRIGger:DELay:TYPe
Sets or queries the type of delayed trigger.
Trigger
 

 






 is a normal trigger. A trigger event occurs when a signal passes through a
specified voltage level in a specified direction. Use the TRIGger:DELay:LEVel
and TRIGger:DELay:EDGE:SLOpe commands to set the voltage level and
direction respectively.

always returns  as the type of delayed trigger.
TRIGger:MAIn
Sets the main trigger level and returns the current main trigger parameters.
Trigger
 







Examples
Group
Syntax
Arguments
Examples
Group
Syntax