Tektronix TDS 410A - Page 280

Command Descriptions
2–262
TDS Family Oscilloscope Programmer Manual
TRIGger:MAIn:PULse:SOUrce CH<x>
TRIGger:MAIn:PULse:SOUrce?
?
<Space> <X>
CH
TRIGger
:
:
PULse
MAIn
SOUrce
:
CH<x> specifies one of the input channels.
TRIGGER:MAIN:PULSE:SOURCE CH2
selects Channel 2 as the source for the main pulse trigger.
TRIGger:MAIn:PULse:WIDth? (Query Only)
TDS 5XXA, 6XXA, & 7XXA Only
Returns the width parameters for the main pulse width trigger.
Trigger
TRIGger:MAIn:PULse:WIDth?
TRIGger :
:
PULse
MAIn
WIDth ?:
TRIGGER:MAIN:PULSE:WIDTH?
might return :TRIGGER:MAIN:PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT
2.0E-9;WHEN WITHIN;POLARITY POSITIVE as the current main pulse trigger
parameters.
TRIGger:MAIn:PULse:WIDth:HIGHLimit
TDS 5XXA, 6XXA, & 7XXA Only
Sets or queries the upper limit for the main pulse width trigger. This is equiva-
lent to setting the Upper Limit in the Pulse Width Trig When side menu.
Trigger
Syntax
Arguments
Examples
Group
Syntax
Examples
Group