Color
Reference
3Ć16
Select Options
To define what color to show where a waveform crosses another waveform:
1. Press the Options main menu item.
2. Select that you wish to use a special color to mark collision zones by
toggling Collision Contrast in the side menu to ON.
Restore Colors
To restore colors to their factory default settings:
1. Press the main menu Restore Colors item (see Figure 3-7).
2. Select what you wish to restore by pressing Reset Current Palette To
Factory, Reset All Palettes To Factory or Reset All Mappings To
Factory in the side menu.
Figure 3-7: Display Menu — Restore Colors
See
Display Modes,
on page 3-28.
For More
Information
To Next Page
Loading...
Need help?
General
